Oil leaks again

Took the car to a family get-together - 80ish mile round trip - all good but it's sprung a leak from the remote oil filter again ho hum.

That aside is cruised at an easy 65-70 although it was very windy and I got grit in my eyes a couple of times. I'll be interested to find out how much of the 23 quid or so's worth fuel I put in it I've used.

Speedo

So I have tried cleaning and greasing the old cable - no help.

Changing the cable over from the '67 - this cable looked in much better condition so I had high hopes - no go.

Finally, fitting the speedo from the 67 got the speedo working. It reads about 8mph fast according to the GPS speedo thingy but at least it is working.

Downside is that the mileage reading is now wrong - it read 42000 exactly when I put it in, now reads 42007 after yesterday's short trip out, and should have a quite a bit more on by the end of today with any luck.

Sunny Day

So time for a drive.

Actually quite a bit of stuff has happened that I haven't blogged so time for a short catch up. When I changed all the steering components for the MOT, I tried to set up the lengths of the arms to be the same as the ones I'd replaced. This didn't really work although it was close enough not to be unsafe.

I also didn't notice that although the new Track rod ends came with grease nipples, they hadn't been filled with grease.

To cut a long story involving an annoying brand new grease gun that didn't work short, I have now greased everything at the front that needs it. The tracking's better but not right.

Speedo

I stole the speedo cable from the '67. I have a theory that RHD speedo cables must be longer and will therefore be hard to find. Once fitted, I took the car for a blast (er I mean gentle drive) to the filling station. I haven't put any fuel in it for a while - not really a clever strategy when the guage doesn't work. So 15 quid's worth of Super unleaded later I found that the speedo needle still jumps around - but closer to the real speed now.

So now the question is - as the new cable has improved matters but not solved the problem, do I need to try a change of speedo head?

Current Mileage 93620

Tyres Out of Shape

There's been a "wobble" from the front end ever since I've owned the car - when I discovered the oval hole in the drag link (after the MOT man angrily and fairly pointed it out) I assumed that was the cause.

I was therefore a bit disappointed to find the wobble still present and if anything a bit worse when I drove to and from the MOT.

So I jacked up the car a side at a time and span the wheels. Every one of the four tyres is out of shape so it's hardly surprising, really. It will be expensive to sort though.

MOT Passed

Well the 68 is now legal again. The testers don't do appointments, so I had to hang around for ages, but having replaced the brakes (new front discs, hubs, calipers, quite a few pipe etc) and quite a bit of the steering, as well as adjusting the parking brake, it passed. Looking back at the paperwork, it appears to have taken since May2007 to get it all sorted - much longer than I thought, but at least it's done.

I think one of the front tyres is out of shape, and there's a long list of stuff to do (isn't there always?) but at least I can drive and enjoy it, once the snow stops.

Instrument Panel

The printed circuit on the back of the speedo/gauges on the '68 is a bit dodgy. In particular, the pins for the connector have been soldered because they were loose. They are still loose and generally in poor condition.

For once, instead of "stealing" the one from the '67, I bought a secondhand one from eBay - actually for an AMC American not a Rebel - but the dials are very similar and the printed circuit is the same and fitted on the back of the unit no problem. This was all fine until put it in place and connected it upon which the tiny fuse for the instrument panel blew. I left it alone then as I had more pressing issues.

A couple of weekends ago I finally got back to it. Seems the back of the circuit board was contacting the metal case of the unit - hard to see why as the dimensions appeared identical to the old unit. Anyway, a couple of strips of insulation tape (and the tiny fuse raided from the '67) and I'm back on the road to a set of working clocks.

One reason I changed the circuit board rather than just fit the one I bought was to keep the mileage honest - I have a limited mileage insurance policy (although I haven't even managed 1000 miles, yet alone the 5000 I'm allowed!).